Agriculture

🌿 Why Is Egyptian Flax Often Lighter in Color?


Water Retting vs. Dew Retting of Flax

Executive summary

Water retting and dew retting are two biological methods for removing pectin and gums that bind flax bast fibres to the woody core. Water retting submerges flax straw in water and relies mainly on anaerobic pectinolytic bacteria; it is faster and usually produces finer, more uniform fibre, but it generates heavily polluted wastewater and is increasingly restricted. Dew retting spreads straw in the field and relies on dew/rain plus fungi and aerobic bacteria; it is cheaper and uses little process water, but it is slower, weather-dependent, and gives more variable, usually coarser fibre. The choice depends on the target fibre grade, water availability, effluent treatment, climate, labour, and regulation [1–4, 8–11].

1. Background: why flax is retted

Flax bast fibres occur in the stem outside the woody shive. Pectin-rich middle lamella binds fibre bundles to surrounding tissues. Retting uses microorganisms and moisture to degrade pectins and gums without destroying cellulose. Over-retting weakens fibres; under-retting leaves gums and makes decortication/scutching difficult. Quality is judged by fibre fineness, strength, colour, homogeneity, gum content, and yield [2, 3, 8].

2. Water retting

Process. Straw bundles are submerged in tanks, pools, ditches, or historically rivers. Cold-water retting typically takes about 7–14 days; warm water accelerates retting but raises energy and cost [2, 3].

Microbiology. The environment is low-oxygen, so anaerobic and facultative pectinolytic bacteria dominate. The process is often described as bacterial/anaerobic retting [2–4].

Quality. Water retting generally gives more uniform, finer, lighter, and higher-grade fibre than dew retting, which is why it has been used for premium linen. Risks include over-retting, fibre damage, and inconsistent results if water temperature/quality varies [2, 3, 8].

Environment and economics. The main disadvantage is wastewater pollution: high BOD/COD, pectin, polyphenols, nutrients, and foul odours; anaerobic conditions can produce hydrogen sulphide and methane. Uncontrolled water retting can cause serious water pollution, and closed tanks with effluent treatment are costly. Water and labour demand are high [8, 10, 11].

3. Dew retting

Process. Straw is spread thinly in the field and exposed to dew, rain, and air for usually 2–6 weeks, depending on weather and straw maturity [3, 4, 7].

Microbiology. Dew retting is mainly fungal/aerobic: fungi such as Cladosporium, Alternaria, Aspergillus, Penicillium, and Rhizopus contribute, together with aerobic bacteria. Fungal colonization and enzyme activity are weather-sensitive [4, 7].

Quality. Dew-retted fibre is usually darker, coarser, less uniform, and lower grade than water-retted fibre, but it is acceptable for coarse yarns, twines, composites, and many industrial uses. Weather risk includes uneven retting, over-retting, mould, and reduced yield [3, 6–8].

Environment and economics. Dew retting uses little or no process water and has lower capital cost, but it requires land, labour for spreading/turning, and favourable moisture. It is the dominant method in parts of Europe, especially where water retting is restricted [8, 10].

4. Comparative table

CriterionWater rettingDew retting
MediumSubmerged in waterField, dew/rain
Main microbesAnaerobic/facultative bacteriaFungi + aerobic bacteria
Typical duration~7–14 days; shorter if warm~2–6 weeks
Fibre qualityFiner, cleaner, more uniform, higher gradeCoarser, darker, more variable
Weather dependenceLowerHigh
Water useHighLow
Pollution riskHigh wastewater BOD/COD, odourLow process water; land/weather risk
CostHigher water, labour, effluent treatmentLower capital, weather risk
Industrial statusRestricted in many regions; used for premium gradesCommon in Europe; preferred where regulation/climate allow

5. Quality, economics, and regulation

Water retting’s quality advantage explains its persistence for premium linen, but its effluent burden makes it unattractive under modern environmental rules. Dew retting’s lower cost and lower water use explain its dominance in European flax, but its variability limits premium applications. Enzyme retting and controlled microbial retting are developing alternatives that aim to combine quality with lower pollution [2, 5, 10, 11].

6. Implications for Egypt and arid regions

In water-scarce and hot climates, uncontrolled water retting is difficult to justify without closed-loop treatment. Dew retting may be limited by low humidity and insufficient dew; supplemental misting/irrigation can help but reduces the water-saving advantage. Practical options are: controlled field retting in suitable seasons, closed-tank water retting with wastewater treatment for high-value linen, and enzyme/controlled retting trials with local flax varieties. Local pilot testing is essential because microbial communities and weather differ from European conditions [1, 8, 10].

7. Conclusion

Water retting wins on fibre quality and speed but loses on water use and pollution. Dew retting wins on cost and environmental simplicity but loses on consistency and quality. The best choice is not universal: it depends on the product grade, climate, water/effluent infrastructure, labour, and regulation.

Sources used

  1. FAO. Future Fibres: Flax. Food and Agriculture Organization, Rome.
  2. Van Sumere, C.F. (1992). Retting of flax with special reference to enzyme-retting. In H.S.S. Sharma & C.F. Van Sumere (Eds.), The Biology and Processing of Flax (pp. 157–198). M Publications, Belfast.
  3. Sharma, H.S.S., & Van Sumere, C.F. (Eds.) (1992). The Biology and Processing of Flax. M Publications, Belfast.
  4. Henriksson, G., Akin, D.E., Slomczynski, D., & Eriksson, K.-E.L. (1997). Identification and retting efficiencies of fungi isolated from dew-retted flax in the United States and Europe. Applied and Environmental Microbiology, 63(10), 3950–3956. DOI: 10.1128/aem.63.10.3950-3956.1997.
  5. Akin, D.E., Foulk, J.A., Dodd, R.B., & McAlister, D.D. (2001). Enzyme-retting of flax and characterization of processed fibers. Journal of Biotechnology, 89(2–3), 193–203. DOI: 10.1016/S0168-1656(01)00301-7.
  6. Foulk, J.A., Akin, D.E., & Dodd, R.B. (2008). Processing techniques for improving enzyme-retting of flax. Industrial Crops and Products, 28(3), 300–307.
  7. Sharma, H.S.S., & Faughey, G. (1999). Comparison of subjective and objective methods to assess flax straw cultivars and fibre quality after dew-retting. Annals of Applied Biology, 135(2), 495–501.
  8. Müssig, J. (Ed.) (2010). Industrial Applications of Natural Fibres: Structure, Properties and Technical Applications. Wiley.
  9. Kozłowski, R.M. (Ed.) (2012). Handbook of Natural Fibres: Types, Properties and Factors Affecting Breeding and Cultivation. Woodhead Publishing.
  10. Textile Exchange (2023). Preferred Fiber & Materials Market Report. Textile Exchange.
  11. European Commission Joint Research Centre. Best Available Techniques (BAT) Reference Document for the Textiles Industry. Seville: EU JRC.
Sonbol flax Co

Share
Published by
Sonbol flax Co

Recent Posts

Comprehensive Comparative Report: Flax Fiber vs. Teflon (PTFE) for Plumbing and Sanitary Hardware

1. Introduction & Approach Boss, given your deep expertise in flax fiber production and export…

4 weeks ago

Pharaonic Linum (Linen)

A Comprehensive Archaeometry and Technical Analysis of Ancient Egyptian Flax Yarn Manufacturing and Textile Engineering…

1 month ago